At 06:44 AM 4/6/98 -0800, Kevin J. Turinsky wrote:
>Thanks for the education on thermosats. Now, is the 80c thermostat you're
>talking about available in a Syncro-type model? Or, should I ask...will
>it work on a Syncro? My temp gauge needle rides just at the top of the
>LED diode. I've read on the list that maybe it should be indicating LOWER
>on the temperature gauge.

1. There is no syncro-specific thermostat. Syncros use the same thermostat
as non-syncro Vanagons.

2. The coolant temp gauge is designed to be a relative indicator of coolant
temperature. As long as your needle stays near the center of the range of
the gauge (ie near where the LED is located), you're OK. Anyone who says the
needle must be at the top, center, or bottom of the LED is wrong. The gauge,
sender, and thermostat simply aren't that accurate. If you change any one of
these components, you'll probably get a slightly different reading on the
gauge. The gauge should be consistent though. If you see a change in where
the needle rides, it's an indication of a potential problem that you should
check out.

Mark McCulley
87 syncro Westfalia (needle rides at top of LED)