Hello,

I checked the archives, and I decided to use an insert or helicoil.  I was
unable to find a helicoil in 14mm X 1.5, so I opted for the insert which
claimed to be 1 size oversize and self threading.  (It has a smaller drain
screw in its center.  However, this thing refused to thread easily, and
when I did finally get it in, it stripped the threads as well.  The
stripped threads came out in little blocks making me think that the case
material is very brittle.

I see at least two options:

1) Search out the helicoil.  However, will it be iffy too because of the
brittle case?  And, I can't seem to find the right size.

2) Flush and dry the opening.  JBWeld the insert that I bought.  The rough
thread surfaces should give the JBWeld plenty of holding power.

Please post your opinions and ideas about where to get the helicoil.

Thanks for your help,

Mike  '84 GL

Michael A. Radtke  -  Z74               Voice: 602-862-4897
Bull                                      FAX:         4853
13430 N. Black Canyon Hwy.
Phoenix, AZ  85029                      Email: m.radtke@bull.com