Message text written by Tom Young
>I think the hardest part might be manuvering a jack around in that
location of the car, especially with another jack (the one holding the
engine) in the way.  The trans also doesn't balance easily on a jack the
way the engine will.

I moved my trans out from under the car myself by putting one end of the
trans on a milk crate and my little (1/4 ton) jack on the other end.
Then I slid the crate (holding onto the trans) out from under the car and
the jack (and the other end of the trans) followed along.

If I was going to remove the trans without removing the engine, and I
didn't want to try to rig up anything "special", I'd probably slide under
the car with a buddy and we'd manhandle the thing out!

On Mon, 8 Jun 1998, Steve Frisbee wrote:

> I would appreciate anyone's creative solutions and advise in dropping
> the manual tranny out of my 85 Westy.  I have none of the specialized
> jacks, chains, I see mentioned in service manual.  I have one small 2
<

I used a chain wrapped around the engine and both ends over a two-by-four
across the engine cover hole to eliminate the need for a second jack
holding up the engine.

John Fleming
85 Westy