Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: spacers and sproings
Date:Thu, 2 Jul 1998 01:33:06 EDT
In a message dated 98-06-30 13:08:37 EDT, fporter@EYRING.COM writes:

> Lower the van back down and again mark/measure the compressed length the
>  shock with the jack removed.

Between these two steps make sure you drive the van around the block to allow
the sproing, shock, and wheel to return to their natural state.

>  Measure the compressed length of the spring (just the spring) with the
>  spacer in place.

Regards,
Jim Davis