Hi Wanagonners,

On Wed, 1998-07-22 18:21:40 EDT, Gary Edwards wrote:

> ...
>                          I found this odd little spring clip in with the jack.
> It's about coat hanger thick and  shaped like a tapered U, about 2" long and
> the ends are turned 90 degrees for about 3/8". Anybody know what this is?

This clip was used together with the lug wrench to remove the chrome hub
caps.  Theese had two little holes near the perimeter in which you could
insert the  ends of the clip.  The  log wrench  was threaded through the
other end of the  clip ... and then without  much effort you could  lift
one end of the hub cap and then remove  it.  This method was superior to
using screw driver   blades or similar  tools  since you didn't  risk to
damage the chrome surface.

Sincerely
 Rainer

 ----------------------------------------------------------------------
| Rainer M Woitok                  | Phone: (+49-9131) 85-7811, -7031  |
| Regionales Rechenzentrum         |                                   |
| Friedrich-Alexander-Universitaet | Fax  : (+49-9131) 30 29 41        |
| Martens-Strasse 1                | Telex: d 629 755 tf erl           |
| D-91058 Erlangen                 |                                   |
| Germany                          | Mail: Woitok@RRZE.Uni-Erlangen.DE |
 ----------------------------------------------------------------------