

| Subject: | Re: A/C question, cooling to,,,, high&low psi. |
| From: | Michael Modl |
| Date: | Wed, 19 Aug 1998 03:56:35 EDT |
In a message dated 98-08-18 00:46:47 EDT, jdpierce@KPMG.COM writes: << I have a 1985 Westy with the A/C unit in the rear. Today my mechanic checked the temperature of the air coming out of the vent and told me that it was about 60 degrees. This is after I have spent close to $1000 at the dealership to get the thing completely fixed -about a month ago. This included a new evaporator-the last one in the US-and a recharge. My mechanic seems to thing this is about as cold as it is going to get. My question is: Is this reasonable? What would be a reasonable temperature? What can be done to decrease the temperature that does not cost a fortune? TIA, John P. Plano, TX 85 Westy-Bastet >> Hi John, it should be cooling between 40 to 48 degrees, depending how hot it is. Your tech should be seeing a pressure on the high side of about 150 to 275 lbs, and on the low side about 25 to 40 lbs. If the pressures are even, then you need an expansion valve, 4 hrs labor plus parts. If the pressures are good, then with a small pin light check what color the freeon is inside the sight glass of the reciever drier. If it's rusty brown color, than you need reciever drier. If you are going to replace the drier, than this would be the time to convert to R134. It will be cheaper to convert than stick with R12. Let us know what happens. Michael Modl 87 syncro 87 quattro
Have something to add on this topic today? Revive this thread in the forum »