Susan,

I had a similar problem which I diagnosed as a corroded/broken female
connector.at the ground location above the fuse panel in my 84 Westy.
Disconnect the negative battery cable to avoid shorting and remove the
two screws holding the fuse\relay panel under the left dash. Feel for a
five or six point ground and check/seat condition of connectors. See the
Haynes or Bentley schematic for details, if you have either book.  My
situation drove me nuts until my wife diagnosed it.

RSVP

Tom Hanlon
Palm Springs, CA

susan hafler wrote:

> hello, listees,
> my low beams (headlights) aren't working. neither are my highbeams,
> except when i manually pull the high-beam lever toward me and hold it
> (as if i were turning on the high beams). what does this mean and how
> do
> i fix it? i'm hoping it's just a fuse, although i haven't checked.
>
> thanks, all
>
> susan and magnus (87 synro gl)
> now in brattleboro, vermont
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com