

| Subject: | Power window regulator fix ('91 Carat) |
| From: | Bill Urban |
| Date: | Thu, 17 Sep 1998 19:26:23 -0500 |
When I tried to install my new $160.00 power window regulator in the driver's door of my van it got caught on something inside the door. In the process of trying to free it I broke it. You can imagine my frustration. Looking at the broken part it was obvious that it was broke in exactly the same place as the regulator I had oriiginally removed. At the bottom of the metal track that the window travels on, the cable goes thru a (1)plastic corner piece that attaches to the track by a small plastic fastening device and it's own "clip" that hooks thru the track. The fastening device is two pieces:(2) a small corner piece with a whole in it, and(3) a plastic pin that does the actual work of holding the assembly to the track. This pin was broke on both of my regulators. Must be a common problem. Buying another reg. was not an option, so I fixed the problem in this design weakness. Instead of the flimsy <1/8th" plastic pin I used a small metric machine screw,3 or 4 washers, a nut, and blue LOCTITE thread locker. First pull the (1) corner piece back in place so you can hook it to the track and clamp it there with a small c-clamp. This is tricky because of the spring tension. Then position (2) in place and insert the screw where the (3)pin had been, head against the plastic. I taped this temporarily. Then flip the assembly over and use a needle nose pliers to insert your washers into the metal recess around the screw you installed, use enough to get the spot where your new nut is going to be accessable to an open end wrench. When your ready to install the nut apply some LOCTITE to the nut and screw, it won't take much. Tighten the screw snug while holding the nut. Don't overtighten and crack the plastic. When finished remove the c-clamp and the regulator is fixed and much stronger than a new one. When reinstalling the regulator it is possible to do it without twisting the whole assembly 180 degrees as the Bentley Manual shows if you use caution and go slow. Hopefull this fix will save someone some money. LATER! Bill Urban Kansas '91 Carat, '79 Super conv, '73 Super, "75 IHC Scout
Have something to add on this topic today? Revive this thread in the forum »