Jon;
Just finished doing just that tonite to my crewcab. I used an Exacto
knife with a  long sharp point. Slit the section of hose down to the
crimp then extend the slit as far as you can under the crimp with the
sharp point. Grab one of the freshly cut edges with some pliers and peel
out the hose. The crimp now will fall off. You are left with a 7mm barb
to attach the new line to. I used regular hose clamps to secure the line.
I did this last year to my 85GL also with no problem.
Drive Safely & Good Luck
Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe

On Mon, 28 Sep 1998 13:53:54 -0600 Jonathan Nowaczek
<Jonathan.Nowaczek@NETALLIANCE.NET> writes:
...>Each fuel injector also has a short rubber lead off the ring line -
>but it
>looks like those hoses are crimped right into the injector.  Does
>anyone
>know if these can be replaced without replacing the injectors?

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]