Does anyone know of any after market cams that work well in a
Wasserboxer 2.1?  I've heard that most beetle cams, which would be any
Type I motor I assume, will fit in the wasserboxer case, which is very
similar to a Type I case.  But that I would have to find one that works
well with the FI, anyone have any experience with this?

    BTW for anyone who knows the history of my engine the no. 4 piston
has a chunk burned off the side about the size of a nickel, the rings on
it were broken into hundreds of tiny fragments, this would explain the
55 psi of compression.  I do have good news, the heads have absolutely
no pitting, they are four years old, 22k miles and I used Prestone
5/50.  I am considering using Autobahn in my new engine, but I've read
that the pitting is caused by electrical currents in the coolant and
heads caused by improper grounding which results in electrolysis between
the dissimilar metals.  I am going to ground both heads (as opposed to
the stock setup which grounds only one) and replace all of the old
grounds.  FWIW when the previous engine was put in the dealer used a
large 4-6 gauge (blue) cable running from the case to the transmission
to the frame.  I've heard that the blue cable is not uncommon, I've
never seen it on any other Vanagons.  I am photographing and documenting
the process, I will post everything of my page when it's done.

David Filcoff            dave@v-dub.musa.com
Volkswagens!            http://v-dub.musa.com
------------------------------------------------------
87 Vanagon GL Wolfsburg Weekender (129k)
88 Fox GL 4 door (152k)
90 Associated RC10 Team Car, Aluminum
95 Specialized Stumpjumper M2 FS
------------------------------------------------------
St. Louis / Columbia, MO
LiMBO - Gateway VW Club - VWoA VW Club - Der Busbezitzer Gruppe