Hi Steve,
Camber IS adjustable regardless of what the dealer says...there is a bolt in
front of the rear wheel on the body.  This bolt needs to be opened and a
screwdriver inserted into the slot to adjust.  I you have or know anyone
with a Bentley manual, it's shown on page 44.4
If you need a copy, let me know and I'll scan the page and send it to you.
Karl Batzler
-----Original Message-----
From: Steve Beyer <skypilot@COASTALNET.COM>
To: vanagon@VANAGON.COM <vanagon@VANAGON.COM>
Date: Friday, November 06, 1998 8:09 PM
Subject: Rear Wheel Camber

>The rear wheels on my 91 MV are out of camber (top tilts in). An
>alignment shop adjusted the front wheels but said that there is no way
>to adjust the rear.  The service department at the nearest VW dealer
>said the same thing. Is that right?
>
>I just put new MXT's all around since the previous tires died an early
>death ---all four wore out on the inside edge.
>
>Any suggestions (other than very frequent rotation)?
>
>                                                        VR,
>                                                        Steve Beyer
>
>
skypilot@coastalnet.com
>