> Check real closely though...I had a bad salve cylinder but the rubber boot on
> the outside was masking the bad seal by holding the leaking fluid inside the
> boot.  Wasn't until I started disassembly that this pressurized boot let its
> load go...a suprising mess to say the least.

Mark

>
>
> Although it could be the clutch, a bad clutch slave and/or master cylinder
> is most likely the culprit, particularly if pumping the clutch makes a
> difference.  You can visually inspect the cylinders for signs of seepage. If
> the master cylinder is leaking, you may also  notice some fluid on the
> carpet near the pedals.