Dear Listees:

I have my 86 Vanagon Syncro rear end running gear all apart: CVs, wheel bearings,
axle shafts, etc.  Boy, those axle nuts were on there!

I'm about to put the whole works back together, renewed with new bearings, CVs
and all.  I wistfully hope for the "VIBRATION" to go away after this.  (Both
shocks were bad, one outer wheel bearing was loose, and two CVs looked stiff
and dry.)

My Bentley does not show the torque for the four (4) big bolts which bolt the
wheel bearing housing (that big casting which holds the two wheel bearings) to
the trailing arms.  I want to get this torque correct!

Can anybody tell me what the torque should be?

Thanks very much.

\ o /  __o        __|    \/
  |     /|   __\o    \o   |
 / \   |\  /)  |     ( \ /o\

 John Mates, Intel Corp.

 RA2-364
 5200 NE Elam Young Parkway
 Hillsboro, OR 97124-6497

 jmates@ichips.intel.com
 (503) 613-5830
 #include <std.disclaimer>