Evening, all!
I've got a brake light on the top of my rear window. It is about
2x20 cm, sticks to the glass with double sided tape. I just
lifted the rear hatch gasket off, and put the wires into the
slot in the gasket, and pushed it in place. Then it just exits
the gasket just above the right taillamp, and into the engine
compartment via the hole for the taillight. Then I just put on
one of those quick connectors, that you just put on to the wire.
Works just fine, and is very visible!

PerL
88 Syncro

George Chapman wrote:

> Volks;
>
> After reviewing the archives for info on installing a
> "third" brake light and discovering no discussion of the
> topic, I would be interested to know if any current listees
> have attempted this installation.  My goal is to install a
> high-mounted brake strip-light, either interior or exterior,
> at the top of the rear deck window (91GL).   I'm assuming I
> can tap into the existing brake electrical wiring without
> much trouble.
>
> Thanks,
>
> George Chapman
> 91 GL "the Shark"
> 79 Bus (Weekenderized)
> {65 Bus Camper (Double Door)}
> {66 Bug Convertible}
> {64 Double Cab pickup}
> {64 Transporter}