In a message dated 98-12-07 10:15:13 EST, hanran.inc@INTERNETMCI.COM writes:

<< Remove the two Phillips head screws; turn the mirror over, and tighten
 the nut against the spring.  Eye-ball it, 'cause there's no spec other
 than a "feel."  Refit the gasket.  Tighten the two screws.  Adjust the
 mirror.
  >>

dont know if all of you realize, but the original poster of this was talking
about a power mirror....completely different adjustment technique from manual
mirrors.....(budd premack described the proceedure well :<)

chris