Robyn;
I assume you are going to use a relay to energize these spots. From this
relay's control coil will be a wire to chassis ground. Instead hook it to
the high beam's hot wire. If the high beams are off the relay will find a
ground path through the bulbs filaments. If the high beams are on the
12volts across the filaments will prevent the spot's relay from
energizing.
Drive Safely & Good Luck
Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe

On Mon, 7 Dec 1998 16:36:29 -0600 Robyn Rudisill
<robyn.rudisill@HOME.COM> writes:
>People of Vanagon!
>
>Where does the trigger current for the high beams go through on the
>fuse block?
>
>I am trying to get my new spot lights to turn off with the high beams.
>
>Thanks for your time.
>
>Robyn
>91 Westy Syncro
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]