Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:[Fwd: Undeliverable: Dometic questions]
From:Earl Smith
Date:Tue, 5 Jan 1999 10:58:05 -0800

System Administrator wrote:

> Your message
>
>   To:      van list
>   Subject: Dometic questions
>   Sent:    Sun, 3 Jan 1999 18:05:21 -0800
>
> did not reach the following recipient(s):
>
> van list on Sun, 3 Jan 1999 19:38:08 -0800
>     The recipient name is not recognized
>     MSEXCH:IMS:Big Tribe:San Francisco:SMURF 0 (000C05A6) Unknown Recipient
>
>   ------------------------------------------------------------------------
>
> Subject: Dometic questions
> Date: Sun, 3 Jan 1999 18:05:21 -0800
> From: Earl Smith <earlsmit@islandnet.com>
> To: van list <vanagon@vanagon.com>
>
> A happy new year to all.  May 1999 be a year of many troublefree miles
> in your Westy.
>
> In order to have troublefree camping with Smoky, I am overhauling and
> cleaning up the kitchen.   Of course the fridge is one of the targets.
> As usual, I suffer from a lack of information on how it is supposed to
> work which makes troubleshooting very difficult.
>
> The easy question is: Where is the fuse that protects the line to the
> 12v heater?  Of course Bently doesn't tell although it lables the fuse
> in the wiring diagram.  Calls it S61.  Big help!  The Dometic manual
> talks about the fuse and says it is under the driver seat.  More lies!
> I assume it is somewhere under the dash.  Is it an inline fuse or is it
> in an auxiliary panel somewhere?
>
> Second question is much more complicated to ask.  There is a green
> indicator light on the display panel that shows if the burner is lit.
> (This is really hard to describe) There is a copper  tube coming up from
> the burner chamber.  It seems to be filled solidly with something.  The
> end in the chamber has a tip that could be a thermocouple.  The other
> end goes into a brass cube screwed onto the end of the button one pushes
> and holds for ten seconds to light the burner.  The wire from the
> indicator light joins onto a terminal that is part of a something inside
> the brass cube.  The whole shebang resembles the pilot light assembly on
> the propane furnace in our basement.
>
> Anyone have an idea of a manual or textbook that could explain how this
> system is supposed to work and how the light gets lit?  Since the
> light's operation is intermittent, I suspect it could be related to why
> the fridge burner is really hard to light sometimes.
>
> Please reply to my email address.   Many thanks.  Earl from Sunny sooke

Have something to add on this topic today? Revive this thread in the forum »