> You may use the EV 15" steel wheels 6x15 ET44, they have the needed load
> capacity, too. But the offset is wrong and have to be adjusted by spacers.
> In front you may use 22mm and rear 27mm. At 2WD Vanagons you have to
> drill the center hole to fit the axle.
> I don't know if the spacers will allow tire chains, they are very closed
> to the wheelwell. You may choose different spacers, the standard Vanagon
> rims have ET39 depth.

Can I just machine pieces of aluminum for spacers?

US listees: Or can I buy appropriate spacers in the US? Where and
how much?

I assume I probably have to get longer studs in the rear to use
the spacer, right?

/Martin