Dave,

You can actually bent the arm CAREFULLY to one side with a pair of needle
nose pliers (I did that), but others have suggested that loosening the
screws holding the   pc board down (the pc board has the resistive track
that is wiped), and repositioning it will do the same thing.   This sounds
like the way to go.

Dave
87 Wolfsburg
90 Westfalia

At 03:10 PM 1/11/99 -0500, Dave Caston & Sherrie Payne wrote:
>How does one bend the sweeper arms on the AFM without screwing them up?
>Can I take the moving part out to bend them down?
>
>
>Dave Caston & Sherrie Payne
>Allentown,PA
>E-Mail: cdcaston@nni.com
>