While you're in there, be sure to squirt a gallon of rust protection
(like Krown) on the shelf (behind the tail light)   malcolm s

Tim wrote:

> <snip> Take out the tail light and housing an you get easy access.
>  Clean the silt/mud/leaves out and wedge a 1/2" thick bit of wood
> to keep the elbow off the floor. Clear any drain holes in the tin.
> Might check the relays in there for crud while you are at it.  And
> submerging your Syncro to that depth when fording is pushing it,
> the block of wood won't help you then either ;).  bye, Tim