THAT is an excellent idea!

Marshall Ruskin
84 Westy
-----Original Message-----
From: kenneth d lewis <kdlewis@JUNO.COM>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Wednesday, January 27, 1999 10:09 PM
Subject: Re: Coolant sensor O ring

>Micael;
>FWIW, I was able to keep the coolant in the radiator and heater by making
>some inexpensive clamps. Each consisted of two sections of broomstick,one
>on either side of the hose to be clamped, drawn together with two long
>wood screws.
>Drive Safely & Good Luck
>Ken Lewis<Kernersville,NC>86 VW crewcab;60 T-5 Coupe
>
>On Wed, 27 Jan 1999 11:37:28 -0500 Michael Townsend
><townsend@RTP.ERICSSON.SE> writes:
>...  Anyway, I don't want to drain the entire coolant
>>system, and
>>I am not sure that I am going to be very fast at putting the new
>>O-ring in
>>and inspecting the sensor housing.  ... My bucket is only so big, and I
>don't want to get stuck with a fountain that I
>>can't stop when the bucket starts overflowing!  BTDT.
>>
>>Thanks,
>>Michael Townsend
>>
>
>___________________________________________________________________
>You don't need to buy Internet access to use free Internet e-mail.
>Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
>or call Juno at (800) 654-JUNO [654-5866]
>