

| Subject: | Re: '85 Vanagon belt sizes |
| From: | Paul Borghese |
| Date: | Fri, 5 Feb 1999 14:26:18 -0500 |
Hi, when I rebuilt my 85' Vanagon last summer I seem to recall all of the belts being the same size. So, if you are in a bind, you could use the power steering pump belt on the alternator/water pump until you can find a replacement. The bus should be quite drivable without power steering. Just try and avoid parallel parking :-). As a side note, I also learned that the most common bolt sizes are: 10mm, 13mm, 15mm and 17mm. So make sure you have at minimum those sockets with you when you travel. Best of luck, Paul Borghese >Driving to work yesterday I lost two belts--Alternator/Water Pump and the >AC belt. I assume one of them broke and slipped under the other one. It >was stupid, I knew they were going to go, but I also knew my alternator was >failing (3rd remanufacture under my lifetime warranty BTW, I should have >just gotten Bosch, I think the ones I am getting are from BIC) and I was >going to take care of it all when I took the squeaky alternator back to the >parts store. > >I did manage to find a belt to replace the Alternator/Water Pump drive. >Does anyone know what the size of the AC belt is? How about the power >steering? The latter is still in tact but I can't read the markings on it >and I might as well do the whole set. > > > >_________________________________________________________ >Donald Baxter >dbax@mindspring.com (home) 404 872 0351 >donald.a.baxter@cpmx.saic.com (work) 770 729 3938 x 3061 >dab1@jhk.com (alternate) > www.mindspring.com/~dbax > >"No matter how cynical you get, you can never keep up." > -Lily Tomlin
Have something to add on this topic today? Revive this thread in the forum »