Russ:  My 91 2.1 litre watercooled syncro/westy uses a carb (as I
have said many times)  The PO put on a Weber 2 barrel downdraft
progressive carb, he used the intake manifold from a beetle (I
think).  The carb + K&N filter sat too high (for the lid), so he had to
cut down the vertical intake pipe from the carb to the horizontal
pipes.  A distributor is of course needed (I don't know what kind I
have).   I have taken some good, long trips with my van (1 year old
to me) and the carbs have worked fine with about the same mpg as
other sycnro westies.

Many people will talk about carbs being MORE problem, but I have
not experienced that yet.  I do delete about 50 posts a day
regarding AFMs, ECUs, O2, injectors, etc.

You should worry about any emissions tests that you have to
pass,  This summer when I am in the US, I plan to have my car
tested to get some readings that I can post to the list.  The carbs
certainly change the way the van drives, you have to DRIVE a van
with carbs as they can be  temperamental, also Carb icing is a
problem when the temps get cold.  A low pressure fuel pump will
do, that's what I have.

Russ:  If I can be of any other help, please let me know.
Malcolm S

Russell wrote:

> Can anyone tell me what all I need to consider if I am contemplating
> replacing the fuel injection system with a carburetor on my '84 Vanagon?
>
>     I have a manifold and carburetor that I used on a 1967 Microbus (dual
> ported heads).  Can I use that?  If so, what psi fuel pump should I
> replace the FI fuel pump with?  Also, are there any down sides to this
> plan?
>
> Thanks.
>
> Russ Gunter