

| Subject: | Re: Brake Help Please!!!!! |
| From: | Don R. Preston, Jr. |
| Date: | Sun, 28 Feb 1999 14:02:10 -0700 |
Yep, removed them both right after I removed the wheels. -----Original Message----- From: EMZ <vw4x4@FYI.NET> To: <vanagon@GERRY.VANAGON.COM> Date: Sunday, February 28, 1999 1:15 PM Subject: Re: Brake Help Please!!!!! > DId you remove the small 11 mm bolts that hold the drum on? >They are located on the outside, right next to the lug nut studs >that are sticking out. There are 2. They bolt the center of the drum >to the hub. > > Eric 86-VW4x4 > vw4x4@fyi.net 72-240z > Pittsburgh, PA USA 1936-Chrysler > > >On Sun, 28 Feb 1999, Don R. Preston, Jr. wrote: > >> Hi there everyone, >> >> Sorry to bother you all with this, but I'm to the point of >> frustration......even the Corona's aren't helping anymore.. >> >> So I was just gonna replace the rear brake pads....... >> >> I can get the rear passenger-side wheel off, but I cannot get the drum off, >> no matter what. I have adjusted the geared adjuster (accessed through a hole >> on the inside of the brake) and loosened the parking brake up. Alas, no >> go... >> >> The drum doesn't seem to be loosening from the back plate at all. I won't >> even go into the driver's-side.....I'm going to have to get an impact driver >> just to get the last two lug-nuts off. >> >> Anybody out there know of some trick to loosening the rotors? >> >> I guess Debbie (p.o.) was right when she said that the van had never had >> it's brakes serviced......*ouch* >> >> Thanks, >> >> Don & Christina Preston >> '87 Wolfsberg Vanagon GL >> '77 Auto Transporter >>
Have something to add on this topic today? Revive this thread in the forum »