Mike,

>BTW what is a 17mm "socket tool"???

It is a socket that is a 17 mm allen wrench on one side and a 3/8" socket on
the other.

A 17 mm head bolt and a pair of vise grips will work.  Also screw a bolt
down tight on the bolt and use a wrench to remove the plug.

Use only 3.2 quarts.  The level should be @15mm BELOW the fill hole.  If you
put too much in the shifting will be difficult into second gear.

Robert

Robert

_______________________________________________________
Get your free, private email at http://mail.excite.com/