On Mon, 8 Mar 1999 21:51:44 -0500, Dave Caston & Sherrie Payne wrote:

> Install a walker turbo muffler
$58 mail ordered
Fits in stock location and you need to get a three bolt flange to use
inplace of the shipped two bolt and the stock brackets the muffler sits on
needs to be bent down a little.  A little longer strap needs to be crafted
also.  I used a muffler strap from pep boys and a 8mm stud.  I bent one end
around the stud and fastened it with a small bolt. I then took the bolted
the other end to the stock bracket with longer bolts.  It fits great and
sounds better than stock.
>1.25 ratio rockers
$129
>swivel rhino feet
$30
>Solid Rocker Arms w/spacers
$40
>Chromoly push rods
Get CUT TO FIT and cut them to stock rod length.
$45
>free flow air filter- K&N, other,
Have not got yet. Seen it for $35 on a web site and I am looking for the
page.
depending on miles New
> air flow meter (track wears out sending erroneous signal to brainbox)
$119  Bus Depot   Ken W.  Has them for @90  Both are NEW.

> By chance, do you know what these goodies cost you-part and install (if
you
> didn't do it your self)?
I did it all my self.
These are basicall "bolt on items" The rocker arms spacers need to be setup
but it is easy.

> And did you shop around for a new AFM? I need one for my 1.9L 85 GL and
> could use a good deal on one. Did you go new or rebuilt? What are the
> differences?

new prices have dropped to @ 100 or less and are better because ALL parts
are new not just the electronic parts.

Robert

_______________________________________________________
Get your free, private email at http://mail.excite.com/