"Robert A. Alexander" wrote:

> Jim - BTW, ask for a "luer lock" syringe!!!  The hub of the needle
> screws into the tip of the syringe.  You can develop all the pressure
> you need this way to get that grease flowing.  The friction fit syringe
> just won't hack it.
>
> BOB

Bob, the 20cc syringe I bought was no problem to press, I pressed until the
hand ached, but the needle didn't pop. I also cut the length of the needle
about 2/3, it was much easier to press after that. Anyway, the needle is
way too thin to fill a cv joint, but steering knuckles and other small
items are no problem.

PerL