I installed a trailer light plug in my Double Cab last summer.  What I did
is go to the junk yard and got the plugs that go into the tail lights with
20cm of wire still attached to them.  I used these plugs as extensions to
the existing wires in the van by solding spade connectors to the ends of
the wires.  I hate cutting any factory wires so I spliced into the
extension that I built.  To make sure everything was tight I used white
grease and duct tape to seal the spade connectors.  If you do it this way
you can always return it to the original factory condition.

At 08:02 24/03/1999 -0600, Joseph Seitz wrote:
>Any suggestions as to where to hook into the wiring for trailer lights?
>
>Joe
>'84 Westy
> and coming soon... Scooter winch for towing foot launch aircraft....
>
>

--   David Marshall - Vanagon List Admin - Quesnel, BC, Canada   --
--    78 VW Rabbit, 80 VW Caddy, 87 Audi 5KSQ, 85 VW Cabriolet   --
--  88 2.0L VW Syncro Double Cab, WANTED: VW / Bombardier Iltis  --
-- David's Volkswagen Home Page        http://www.volkswagen.org --
-- Fast Forward Autobahn Sport Tuning  http://www.fastforward.ca --
-- david@volkswagen.org (pmail) or vanagon@volkswagen.org (list) --