

| Subject: | Re: More light for rear interior |
| From: | David Beierl |
| Date: | Mon, 5 Apr 1999 19:49:51 -0400 |
I use a regular clip-on reading lamp with a flexible gooseneck, with an 11-watt PAR-style high-efficiency fluorescent (from Sylvania) in it. That is rated as a 40-watt equivalent, which is plenty because the reflector focuses it all in one direction. If hung from one of the tent support posts it lights up the kitchen and central area beautifully, and it clips to the utility shelf or whatever for a reading or task light. It draws a bit over an amp total at 12v. We hardly ever use the built-in halogen light anymore. The snags are that it trails an extension cord around, and that it runs on 110v. I have a small (140w continuous) Stat-Power inverter velcroed to the forward face of the kitchen cabinet which serves beautifully for this and other light AC duties. The inverter is powered by cig-lighter plug into a set of three sockets I mounted on the inner-after edge of the driver's seat-box. It draws about 60 milliamps no-load, same as the refrigerator auxiliary fan, so I can leave it plugged in for days without drawing the battery down much. david At 19:01 4/5/99 -0500, Elkavitch, Michael and Diana wrote: >Well, it is getting close to the time that Siegfried will carry us on >vacation. I would like to add a reading light on the passenger side rear. >Any thoughts on what/where to get one and the best way to install it? TIA > Mike David Beierl - dbeierl@ibm.net
Have something to add on this topic today? Revive this thread in the forum »