> I have read that most folks seem to store their
> tables behind the drivers seat,presumably folded
> down. My question is how? My Westys tables are
> attached with a screw that is set in a round knob
> on the arm. And the screw goes into a plate that
> is attached to the table itself. This is a 87
> Westy.
>          I had an 85 Westy that had approx. 1.5
> inch posts attached to the bottom of the tables
> and these posts would slip into a corresponding
> female loop  on the arm . There was a set screw
> with knob  on the loop to tighten the tables in
> place . Neither setup would let me fold the tables
> down to store behind the front seat.  Can anyone
> clue me in? Thanks
> Tom Czerniak