

| Subject: | Thunk-Thunk Revisited. |
| From: | John Rodgers |
| Date: | Fri, 16 Apr 1999 23:58:24 -0500 |
-- [ From: John Rodgers * EMC.Ver #2.5.02 ] -- Since this problem began, I removed the top grill and found that my radiator was loose. Every start and stop it would move back and forth...thunk-thunk! On close inspection, it appeared that the posts on each side of the radiatior at the top, fit into a hole in the metal frame just above it. In my case the pin didn't fill the hole, allowing the radiator to move back and forth. I thought that to be a bit strange, and made a call to Camelback VW. Their microfische showed 4 rubber bushings, one for each corner of the radiator, were supposed to be installed on the posts when the radiator was properly installed. That provides security and vibration damping. Don't know what happened to mine, but they cost $0.38 each. Recommend all check their radiator to see that the bushings are there. Their absence could result in radiator damage. John Rodgers "88 GL Driver in NM.
Have something to add on this topic today? Revive this thread in the forum »