Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Syncro rear hub removal, spindle nut size
From:David Beierl
Date:Tue, 27 Apr 1999 16:15:12 -0400
At 14:27 4/27/99 -0500, S2 wrote:
>The torque setting is 253 lb/ft.  You should be able to rent a torque wrench
>that will read up to 300.

Uh...Steve...that's the three-groove crank pulley (350 nm/258 lb-ft).  The
hub is 500nm/360 lb-ft.

:)
d
David Beierl - dbeierl@ibm.net