At 06:02 PM 4/22/99 -0400, you wrote:
>David - Bubba LeRoy, who works at the Rolls dealership, taught me that
>one just tightens hose clamps until rubber just fills those nifty little
>louvres in the clamp.
>
>BOB
>

Of course, Bubba's other rule is "tighten it till it strips, then back off
a quarter turn..."  :)

Seriously, I have read that one of the problems with screw type hose clamps
is that rubber is subject to "cold creep"; that is, over time the hose
sort of oozes out from under the clamp, thus loosening the connection.
This is one of the reasons that most OE clamps are the spring type; they
keep a constant pressure on the rubber...
I would feel more comfortable with new lines than old, no matter what!

Chris
87 Wolfsburg