Scott Walker wrote:

> I've switched the wabbit to a ten row oil cooler and had a similar idea for
> the van but was looking for suggestions for placement.

Scott, I know some German tuners put TD intercoolers in the wheel well, but I
do not consider this as an optimal solution because of road spray etc. One
other place that you could consider is the intake grille at the sides of the
van. These sits right in the air flow, as these were originally used to suck
cooling air for the air cooled Vanagons. You should also check if the oil pump
can pump the oil all the way up to the grille, but the cooler would sit cold,
and clean.

PerL
88 Syncro
Arendal, Norway