Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: My First Oil Filter Failure
From:Michael A. Radtke
Date:Tue, 18 May 1999 10:31:24 -0700

Mark,

I am probably showing my ignorance here, but on which side of the oil filter is the oil pressure measured?

Thanks,
Mike   '84 GL  '60 Vespa

----------
From:   Mark A. Williamson[SMTP:mwilliamson@ABCH2O.COM]
Reply To:       Mark A. Williamson
Sent:   Tuesday, May 18, 1999 4:05 AM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Re: My First Oil Filter Failure

I have commonly used VW-spec filters, but have on occasion been obliged to
used Fram.  A mistake.  In all but one instance of using Fram (I have used
four since 1993 on the same 88 Wolfsburg) I registered low oil pressure
response after driving at highway speed.  Often for only 10 minutes or so.
Replacing the filter with Mahle ALWAYS relieved the symptoms, never to
return until the next Fram was (reluctantly) installed.

That said, you may ask why Fram ever makes it into my bus.  Simple.  Lack of
preparation to have the required filter on hand when leaving for road trips
and changing the oil after a week on the road (highway speeds).
Fortunately, I have driven very few miles with the Fram filter (which seems
to work fine under around town conditions).
--
Mark A. Williamson
Denver, CO
88 Wolfsburg Weekender (135K)