By all means please post the picture.

----- Original Message -----
From: Karl Mullendore <thewestyman@MINDSPRING.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, May 26, 1999 12:32 AM
Subject: Re: brake bleeding

> I've tried all the ways to bleed brakes and clutch cyls. in my 18 years in
> the business, and here is, by far, the easiest way to do it (and the way
> I've done it for the past 7~8 years!) :
>
> Way-cheap and long-lasting pressure bleeder: Total cost around $15~20 !
>
> Go to your local gardening store, Lowes, etc., and purchase one of the
small
> one-gallon hand-pump sprayers intended to be used as a garden insecticide
> sprayer. Also pick up a brake fluid reservoir cap from either an early
> Vanagon or Rabbit (the plain one without a level sensor), and a hose
> fitting, the correct size for the sprayer's hose. Drill a hole in the cap,
> screw in the fitting, attach the hose. Now fill the container about half
> full with fresh brakefluid. When you are ready to use it, screw the cap in
> place of the original cap, pump the handle about 20 times to build
pressure.
> (I usually set the pump on the lower rim of the steering wheel) Then all
you
> have to do is go to each bleeder valve, open it and watch the old flow out
> as the new goes in. No more helper needed! Works great on those odd things
> that won't bleed any other way, and you are guaranteed an air-free job. If
> anyone needs a visual of what it should look like, I'll be glad to send a
> digital pic.
>
> Karl
> '87 Westy Syncro TD