Is the broken bolt tight in it's threads? If not, try turning it out with a
pencil eraser or a straight-bladed screwdriver. If it IS tight, then I would
remove the half-shaft (probably out already?) then remove the large outer
axle nut, and push the stub-axle through and out of the bearing. Then you
can put it in a vise and turn the bolt out with a centerpunch or other tool.

Karl

----- Original Message -----
From: <JordanVw@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, May 28, 1999 2:24 AM
Subject: snapped off cv/axle bolts in rear axle hub shaft

> how do you get out bolts that have snapped off flush in the rear axle
(outer
> CV bolts) ?  any ideas?
>
> thanks
> chris