Hi All,
I have an 84 Westy-4sp -1.9L engine.  The water-hose bleeder's stem broke
off right in front of my house after a long trip to a remote area in Baja
California.  Talk about being lucky, since I did not have a spare one with
me.
Can any one advise the procedure of how to install an air bleeder.  And if
additional coolant is needed, what is the coolant/water mixture? This is the
plastic part with an H shape mounted on the firewall in the engine
compartment.  All four ends of the H shape are connected to the water
coolant hoses.  The stem is located in the middle of the H pattern and
connected to a smaller hose.  And finally above the stem is the thumb nut
for some sort of adjustment.
Many thanks in advance.
Cheers!

Andrew Pham
Aurora Biosciences Corp.
11010 Torreyana Rd
San Diego, CA 92121
619-404-6614
619-404-6726 fax
phama@aurorabio.com

[text/html]