Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: 2nd request- Measurements for side holes.
From:David Beierl
Date:Tue, 13 Jul 1999 13:30:48 -0400

At 14:25 7/13/99 -02-30, Bob Norman wrote:
>Help.
>
>I hate to do this, but I'm desperate, I need some measurements
>indicating exactly  where the exterior access holes are for the water
>filler & city water hook ups.

Bob, on my '84 US Westy the forward edge of the city connection plate is
precisely 21 in forward of the rear panel seam; the top edge is 22 13/16
above the lower seam, measured around the curve.  The next plate on mine is
the electrical connection, followed by the water fill.  Each of those is
fitted almost flush to the one ahead of it (1/16 or so clearance).

Hope that helps...

david
David Beierl - dbeierl@ibm.net