I am struggling with replacing some coolant hoses on a 1985 Vanagon and
have found some useful information on the engine compartment hoses in the
archives.

Unfortunately, I have not found much on the heater circuit. A lot of this
appears to be replaceable with standard FLAPS heater hose, but one is
giving me a problem. The feed for the heaters comes off the rear of the
right head. The hose is formed with about a one inch diameter and a couple
of bends, before reducing down to a smaller size and ending at the tee
feeding the rear heater. Any suggestions for this one?

**********  John Clavin  |  jjc@bga.com  |  Austin, TX  **********