Joel:

Do yourself a favor, remove that cap fix - it only removes the symptom (if
done properly) but not the problem! (Properly done is + side of cap to pin
2, - side to pin 4)

The 5 min fix is to get some electronic cleaner at the FLAPS, carefully
remove the cover of your AFM (it is siliconed closed from the factory), and
spray liberally. Move the wiprer carefuly back and forth a few times. Let
the cleaner evaporate.

Replace cover, and seal with a good tape.

Make sure it is electronic (not electrical) cleaner -evaporates super fast,
very cold as it evaporates, comes in a can sorta like wd-40, many brands are
good, they're all basically the same formula.

Good luck!

Marshall Ruskin

>I did the capacitor fix and boy do I have some nasty hesitation now!!!
>What is the fix for THIS problem!!!  Also where should i ground the AFM?
>
>Joel
>
>
>___________________________________________________________________
>Get the Internet just the way you want it.
>Free software, free e-mail, and free Internet access for a month!
>Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>