This story reminds me of a job I did at my condo - I had concrete stipple in
the ceiling, and I hated it.

So, after trying to remove it (impossible) I decided to fill it with drywall
mud, and then sand it smooth.

Over 220 Lb of mud, and more than 80 hrs later, my ceiling was ready to be
primed.

Do not try this at home!

Marshall Ruskin

>I need a cool logo for my website <snip>>Now for some good Vanagon content.
Well actually, this applies to Vanagons,
>but I did this to my '74 Westy.
>
>My poptop was not in the best condition and I didn't want to spend the big
>bucks to have it professionally painted.  So I sanded it down, filled the
>cracks and scratches with bondo and spot putty and rolled on the paint.
>
>I used Rustoleum oil based paint designed for patio furniture.  I've been
>using this on my bumpers from a spray can, and it looks a lot like the matt
>white original paint.  I bought a couple of quart cans and a smooth foam
>roller and went to work.
>
>I carefully rolled the paint on and I'm quite pleased with the results.  A
>pretty smooth finish with a little texture.  Not bad, and much better than
a
>brush!
>
>The only problem I encountered was with trying to get all the lint and dust
>off the fiberglass.  Even with sanding, the fibers tend to latch on to
lint.
>After the first coat, I went over the paint and sanded out the dust and
small
>particles.  The first coat sealed the fibers.  If I had to do it over
again,
>I would have sprayed on a sandable primer first.
>
>Now for tomorrow, I'm installing the new custom made poptop canvas from
Dawn
>Smythe at PLF.  (Custom contrasting color with white netting and larger
>windows.)
>
>Steve Lashley
>'74 Campmobile
>'93 EV MV
><A HREF="http://eurocampers.com/">http://EuroCampers.com</A>
>Importing German Side Tents, Carver Propane Heaters and other Accessories
for
>Bus, Vanagon and Eurovan
>