Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Weekender seat/bed into my '81--How do you install it?
Date:Mon, 13 Sep 1999 09:15:50 EDT
In a message dated 9/13/99 7:31:03 AM Eastern Daylight Time, vw4x4@FYI.NET
writes:

<< The seat is a bolt in installation, except for the pins located
 at the top of the seat back. These pins must be moved. You must remove
 the plate from the donor, and weld them into your Van. This is a
 reletively simple thing to do, if you have welding experience.
  >>

ive installed these in plenty of vans, and never use the seatback locking
pins. its not necessary to use these, as the seatback stays up without them.
so there is no welding involved.
chris