Right. I had a Air compressor come crashing thru the backwindow
of a pickup truck once. Without the window/cab that it hit, there
would have been some dead people. If your not going to anchor the
seat back don't even think of hauling anything back there. The
objects will become projectilies at the passengers if you have to
spike the brakes.

            Eric                   86-VW4x4
            vw4x4@fyi.net          72-240z
            Pittsburgh, PA USA     1936-Chrysler

On Mon, 13 Sep 1999 JordanVw@AOL.COM wrote:

> In a message dated 9/13/99 7:31:03 AM Eastern Daylight Time, vw4x4@FYI.NET
> writes:
>
> << The seat is a bolt in installation, except for the pins located
>  at the top of the seat back. These pins must be moved. You must remove
>  the plate from the donor, and weld them into your Van. This is a
>  reletively simple thing to do, if you have welding experience.
>   >>
>
> ive installed these in plenty of vans, and never use the seatback locking
> pins. its not necessary to use these, as the seatback stays up without them.
> so there is no welding involved.
> chris
>