Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Putting an engineless vanagon on ramps
From:Coby Smolens
Date:Tue, 14 Sep 1999 08:24:35 -0700

I'd say you could get a good floor jack under the front tranny mount - we
have used this spot for years. In the old days at Gandalf's Garage, before
we had lifts, we did everything on the floor using jackstands and
floorjacks. We always picked the whole rear (or front) of the van up from
the middle this way. You slide the jack under the car from either side, from
in front of the rear wheel. In the front you can use the frame piece at the
back edge of the spare tire pan.

Coby

Valley Wagonworks
"Intimately acquainted with VW Vans since 1959"

Volkswagen Bus, Vanagon, Westfalia and Eurovan
Repair and Service Specialists

1535 Sir Francis Drake Blvd., San Anselmo, CA 94933
Voice:(415) 457-5628
Fax: (415) 457-0967
http://wagonworks.com
mailto:contact@wagonworks.com

> Date:    Mon, 13 Sep 1999 12:04:30 -0400
> From:    Markus Benne <mbenne@CROSSKEYS.COM>
> Subject: Putting an engineless vanagon on ramps
>
> Is there a good place at the back of the vanagon to jack an engineless
> bus up high enough to get car ramps under it?
>
> Thanks,
> ...Markus
>