

| Subject: | Re: 2WD Westy springs - follow up |
| From: | Michael Snow |
| Date: | Mon, 27 Sep 1999 05:55:53 -0700 |
Someone please correct me if I am wrong about this, but I believe that Vanagons have progressive-rate springs. Though my VW experience is limited, I have never seen a set of progressive springs that worked very well on a truck. The lighter part of the spring always sags and takes a set, leaving a too-short single rate spring. My Westy has serious spring sag in the rear, which I attribute to the usual progressive spring sag. I have contacted several manufacturers about making Vanagon springs. Most would not touch them. There is a company in San Diego (National Spring) that can make them, but they have another firm in the San Francisco area wind all their coils. They have a great reputation in the 4x4 world. I would be interested in single rate, stock height, stock stiffness springs. Mike Snow 1982 Westy Diesel > -----Original Message----- > From: Vanagon Mailing List > [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Todd Last > Sent: Sunday, September 26, 1999 14:44 > To: vanagon@GERRY.VANAGON.COM > Subject: 2WD Westy springs - follow up > > > I previously posted to see if there was any interest > in 2wd Westy > Springs. I'm trying to gather some information to see > what kind of > spring would be most desired by the members of the > group - with the > possibility of a group purchase in mind. > > If you think you may be interested in new springs for > your 2wd Westy, > please email me with the following info: > > If new 2WD springs were offered would you like: > > 1.) Exact Stock replacement springs - same height and stiffness > 2.) Same height as stock springs but slightly stiffer - say 15% > 3.) Same stiffness as stock springs but slightly higher (4-5cm) > 4.) Both Taller and stiffer than the stock springs > > Also, please let me know what model year Westy you have > > > Let me know which, if any of these appeal to you. > > Regards, > > Todd Last > '88 Westy
Have something to add on this topic today? Revive this thread in the forum »