Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: : Fuel Pump Swap/Oil Plug timesert prob./f-
Date:Thu, 7 Oct 1999 06:10:34 PDT

:       Vanagon 1.  Does the 77-79 Type 2 fuel pump for efi the same as the
vanagon(86-91)?

Yes it should work OK.
CB Performance has one that will work also cheaper than buying one Bosch.

http://www.cbperformance.com/catalog/021.htm  Part #7138 has the 14mm inlet
and 7mm exit.

3.  Is there a fairly simple method to determine whether or not your
flywheel surface needs resurfacing when doing a clutch replacement?  Mine is
slipping badly, most likely due to oil contamination, or is this just a good
thing to do regardless of why the clutch has gone south?

If the surface is blued, grooved or glazed, surfacing is needed to keep the
new clutch from being damaged from the flywheel.
IMPORTANT if the flywheel is removed USE NEW BOLTS ONLY FROM VW (correct
type)or the bolts could FAIL destroying the engine at worst or causing the
job job to be redone at worst. The bolts are stretch bolts and can fail if
reused.
This is per Bently.

Robert

________________________________________________________________
Get FREE voicemail, fax and email at http://voicemail.excite.com
Talk online at http://voicechat.excite.com

Have something to add on this topic today? Revive this thread in the forum »