>
> Hi Grant,
>
> There is always residual pressure in the supply side and if the engine
> commenced operation without the fuel pump running, it would seem like it
> was running on 1-2 cylinders ! Grant you must start working with a
> voltmeter (and not a test light). The fuel pump relay supplies power to
> the pump while the DCM supplies the ground. Also when the key is
> switched on with the stock Digifant set up, the pump primes for about 1
> second and you can hear it. Does your pump do this. Following that, are
> you delveloping fuel pressure (pressure gauge?).
>
> Good luck,    JP

John,
I'm not sure if the pump was priming or not when this
happens. The last few times its happened I just replaced the
power supply relay with a spare and it works fine for awhile.
I didn't even think about the fuel pump until your e-mail
last night. If the new wire I installed last night doesn't
fix the problem I will check the pump operation.

Thanks, Grant