As per the Digifant wiring diagram that I emailed the list, the Digifant
computer ground pin number 85 on the fuel pump relay.  Pin 86 goes directly
to "15" which is "12V with key on"  a simple way to tell if this is working
or not is disconnect the terminal 86 wire on the relay and run a test lead
from 86 on the relay to 15 on the ignition coil.  This assumes that your
coil is getting 12V when the key is on...

At 01:31 PM 14/10/1999 -0700, Grant Holst wrote:
>Does anyone know what energizes the coil in the
>fuel pump relay? I think one side comes from the positive
>side of the igntion coil and the other end goes to the ecu.
>
>Grant
>
>

--   David Marshall -                    - Quesnel, BC, Canada   --
--    78 VW Rabbit, 80 VW Caddy, 84 VW Westie, 85 VW Cabriolet   --
--       87 Audi 5000 Quattro, 88 2.0L VW Syncro Double Cab      --
-- David's Volkswagen Home Page        http://www.volkswagen.org --
-- Fast Forward Autobahn Sport Tuning  http://www.fastforward.ca --
-- david@volkswagen.org (pmail) or vanagon@volkswagen.org (list) --