Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Vanagon Bra??
From:Pierre A Lachance
Date:Mon, 1 Nov 1999 18:10:29 -0500

dear mr rodgers....

you have to believe me that this "film" from 3m is very good... we have
tried it for several years on many cars and in the quebec city region the
temperature varies from  -35 to 90' F...heat, humidity rain snow etc... it
is usually put on new paint, but can be also on old, but  if you already
have  "dents" , they  can  produce bubbles in this film... as for taking it
off, well people are so glad to have it, that they do not think of taking it
off ??? after  a few years this film will have a tendancy to " yellow"  a
little ( sorry, my english is not very  good)  only on white cars does it
show... we then take "Daki" and polish it  and this disappears...But why
should you have to take it off?? your decals will be happy not to receive
rocks etc
 pierre
lac beauport, pq
zephyr 85
the bomb golf vr6
----- Original Message -----
From: John Rodgers <inua@SCOTT.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: 1 novembre, 1999 11:36
Subject: Re: Vanagon Bra??

> I saw the material applied over sponsor decals on racing cars. It appeared
possible
> to remove without distroying what was underneath, but you are right to
question it.
> Before using, I would do a test to be sure it wouldn't pull my decals off.
>
> John Rodgers
>
> sxs@concentric.net wrote:
>
> > Are you sure it is easily removable?  There is an
> > adhesive...and on a syncro, i fear it may pull the
> > decals off if youy try to remove it.
> > steve
> >
> > a > > > >
> > > > ______________________________________________________
> > > > Get Your Private, Free Email at http://www.hotmail.com